Affetti Giuseppe & C. s.n.c.

Solidity and reliability 

The horizontal centrifugal range CGO, has been designed in order to obtain the best performances with a reduced cost. Easy to handle, the pumps of this range are strong, built in their components with high thikness to give a product with the maximum reliability. The motor is connected to the pump throught the coupling, fixed on a carbon steel base. Suitable to transfer acid and basic solutions, the wet ends, are built in thermoplastics (PP-PVDF) and O-ring in the proper elastomer material (EPDM-FPM-FEP).Different mechanical seal solutions are available: from the lip seal to primary label seals (internal, external and double flushed) in standard version with faces in Silicon Carbide (SIC-SIC) and bellow elastomer (FPM-EPDM). The impellers installed are generally semi-open, but they are available in the closed version for hot liquids and without solids in suspension. 

 
 
 

Exercise temperatures and materials

MATERIALS SELECTION 
The materials used in the production of our pumps, are carefully selected based upon the pumped liquids. Each material used must answer at mechanical and chemical characteristics in order to grant the best reliability of the pump. The working temperature is a really important condition, especially because the thermoplastics are materials very sensible to low and high temperatures.  



Performances

PUMPS SELECTION 
Pumps are selected based on the data transmitted from the Customer. Capacity Q, head H, specific gravity and liquid viscosity,temperature, N.P.S.H. available in the plant are required in order to proceed to the correct pump choice. For the best selection,the choosed pump has to work close to the best efficency point of the curve in order to obtain a reduced energy consumption and to avoid abnormal hydrodynamic situations (cavitations,turbulences, etc.) 



CURVES

RPM 2900 50Hz

RPM 1450 50Hz

RPM 3450 60Hz

RPM 1750 60Hz